|
Post by Gary Lecomte on Jul 29, 2013 13:54:36 GMT -8
No Membership Required, Except to Post Arrachments.
I'll see how it goes and IF there are NO CRAP or Spam Postings, I will leave it open for all to see and post.
Gary, Administration
|
|
|
Post by retiredat55 on Jul 30, 2013 5:03:18 GMT -8
Gary,
Good idea!
I hope there will be some more discussions from now.
Take care,
Dante
|
|
apam
New Member
Posts: 1
|
Post by apam on Aug 15, 2013 5:54:57 GMT -8
what software to simulate the circuit????urgent
|
|
|
Post by Gary Lecomte on Aug 17, 2013 7:09:25 GMT -8
what software to simulate the circuit????urgent I Rarely use Simulation Software. But it Depends on What circuit your trying to Simulate? Too may Times I have found some circuits that Simulate OK but Don't work in real life. Or they work in real life, But don't work at all in Simulation. I prefer to just Prototype them. (But I usually also have all the parts at my disposal.) Maybe others have had better results with this.
|
|
|
Post by lamazoid on Sept 23, 2013 3:34:29 GMT -8
Gary, it seems to be a problem with access to the forum. Yesterday i gave my friend a link to the topic about stun gun, and he was unable even to READ it upon registration.
|
|
|
Post by Gary Lecomte on Sept 26, 2013 15:05:25 GMT -8
Sorry I Don't know of any Problem.
I have no problem in reading any articles.
Lamazoid, What about You?
|
|
|
Post by skunken on Sept 27, 2013 10:51:17 GMT -8
i hope we got a fine electronic site here.if we tallk the some languvich we kan make things thats revolutions the world.
|
|
|
Post by lamazoid on Sept 27, 2013 22:46:19 GMT -8
Sorry I Don't know of any Problem. I have no problem in reading any articles. Lamazoid, What about You? I have checked from another browser (which does not have saved login sessions on this forum), and yes, it won't allow you to read forum without logging in. You can also check this via any proxy, like hidemyass.comIt seems that post and read access options are made independent on this forum. That should be listed somewhere in control panel, anyway.
|
|
|
Post by Gary Lecomte on Sept 28, 2013 5:16:11 GMT -8
Lamazoid, Sorry I Don't know what to do about it.
I just checked again and this board is presently set to allow anyone to see it and to post messages on it.
The Only Non-Member Restriction is for Uploading Pictures and posting Polls.
|
|
|
Post by lamazoid on Sept 28, 2013 9:24:32 GMT -8
hmm, maybe a bug in forum engine? That is definately abnormal. Try to temporary allow everything (including pictures and polls), and we'll see, if the problem remains. Then you propably need to write to proboards hosting support, maybe some update/bugfix or settings reset (by hosting administrator) is required. I have personally installed and customized many forums and site engines, and from my experience, problems like that typically caused by database corruption due to bad update, or issues with script version compatibility. anyway, host admin should fix that.
|
|
|
Post by Gary Lecomte on Sept 28, 2013 10:36:04 GMT -8
Hi Lamazoid, Why don't you try to fix it. I made you a Moderator, so I believe you should have access now. Go into "admin". Personally I am almost ready to shut this forum down. It seems no one is interested anymore. Gary hmm, maybe a bug in forum engine? That is definately abnormal. Try to temporary allow everything (including pictures and polls), and we'll see, if the problem remains. Then you propably need to write to proboards hosting support, maybe some update/bugfix or settings reset (by hosting administrator) is required. I have personally installed and customized many forums and site engines, and from my experience, problems like that typically caused by database corruption due to bad update, or issues with script version compatibility. anyway, host admin should fix that.
|
|
|
Post by lamazoid on Sept 28, 2013 22:37:53 GMT -8
Thx Gary, but i can't see any "admin" page, can't even modify others people posts. So it seems, privileges system on this forum is totally corrupted. I think, this is the main reason, that so few people are participating in the forum. Say, someone finds a link to this forum via Google, but they can't login, and registering just to see something is not acceptable for most I-net users nowadays... They will get back to google to find some other, "free" link. We need to figure out this. I foud some topics on support forum, maybe this could help: support.proboards.com/post/5293440support.proboards.com/thread/460242/creating-managing-categories-boards
|
|
|
Post by Gary Lecomte on Sept 29, 2013 6:59:07 GMT -8
Lamazoid, Do you not see this "ADMIN" at the Top of your Screen? (I Boxed it in Red.) Attachments:
|
|
|
Post by lamazoid on Sept 29, 2013 7:21:31 GMT -8
Lamazoid, Do you not see this "ADMIN" at the Top of your Screen? (I Boxed it in Red.) No, as i said. But there is something strange on the main page: Forum recognizes me as "staff member" but does not provide access to admin panel. That's why i think there is some error in forum engine.
|
|
|
Post by Gary Lecomte on Sept 29, 2013 12:49:33 GMT -8
Lamazoid, Yes I also Believe it says you are a Staff Member. So I Don't know why it is not allowing you access.
Unfortunately if you ask Proboards for their help with problems, They Charge Money for their services. And I am not prepared to spend money on this forum.
I will Sign Out and Create another Identity for me. Than I will make this new Identity as a Moderator and see if it accepts this.
Give me a day or two to try this.
|
|