|
Post by volkswagenvan on Feb 19, 2021 14:59:00 GMT -8
I think i got it right now!
|
|
|
Post by retiredat55 on Feb 20, 2021 2:28:33 GMT -8
😂 I'd say you check your timer circuit! 🤣
|
|
|
Post by volkswagenvan on Feb 20, 2021 19:57:18 GMT -8
Put in a more trusted Timer and added a GOOD timimg Capacitor! Thank`s Dante! Attachments:
|
|
|
Post by retiredat55 on Feb 21, 2021 1:24:50 GMT -8
Great!
How deep is your earth pin? Did you test your circuit?
What was the result? (in liters please)
|
|
|
Post by volkswagenvan on Feb 21, 2021 2:43:14 GMT -8
Good questions Dante!
Earth pin is now about six foot seven down. (That`s where i found the second body) Note. You Cannot get out of a six foot seven hole without having the bones to stack!
The testing has been minimal due to the lack of gullible neighbors still above ground. Note the problematic body`s from the last testing.
Best guess is that I am above all reasonable expectations and the plausibility of positive more nutral phenomena is around 1.21 gigawatts or using gigawatts hours to liters atmospheres conversion calculator 1.21 gigawatt hour = 35529237601.776 liter .
I hope to have new neighbors moving into that empty house soon and then i can get more test results for you!
|
|
|
Post by retiredat55 on Feb 21, 2021 5:54:34 GMT -8
Beautiful! 35529237601.776 liter is perfect result!! Go on.
Be careful with that neck strap in combination with the electric eel at the same time! Better place a switch in between I think.
|
|
|
Post by lamazoid on Feb 21, 2021 6:06:29 GMT -8
i think you need kinda red matter to create black hole!
|
|
|
Post by volkswagenvan on Feb 21, 2021 9:47:55 GMT -8
Ok Dante, Added a metal oxide varistor Just for safety in case the eel gets overly agitated! I think the common clamping value of 1.21 gigawatts should be about right! Lamazoid,...We ALL know the unstable power of red matter but it seams to be stable for now in my simulations. I will keep it in the circuit for now. What`s the worst that could happen? Attachments:
|
|
|
Post by retiredat55 on Feb 22, 2021 2:45:27 GMT -8
You should give it a try testing for some hours to see how big and fast the black hole can grow now. I am also curious what color it will be.
|
|
|
Post by lamazoid on Feb 22, 2021 6:34:00 GMT -8
i think an antenna circuit could use some protection for expensive chip, kinda coherer or like (hire someone with a little hammer to reset it)
|
|
|
Post by retiredat55 on Feb 22, 2021 11:33:47 GMT -8
😂👍
|
|
|
Post by volkswagenvan on Feb 22, 2021 19:19:34 GMT -8
I added a big Spark Arrestor to protect that chip! As for the black hole, I think you're being a little dramatic. Never Happen! Attachments:
|
|
|
Post by retiredat55 on Feb 23, 2021 0:39:55 GMT -8
Do you have a PCB layout for this circuit? (after modifications!)
|
|
|
Post by volkswagenvan on Feb 23, 2021 2:35:00 GMT -8
Not yet Dante. Thinking of just using a 4ft X 8ft piece of pref board. Perhaps just point to point on a sheet of plywood for now.
|
|
|
Post by retiredat55 on Feb 23, 2021 3:39:40 GMT -8
Maybe you can put some wheels under it, for easy testing in the lab.
|
|