Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 22, 2008 17:17:34 GMT -8
>This is my stun gun driver, without the T2. Delivers a good quantity of volts, it´svery small size, a cubic inch (1 x 1 x 1 inch) I want to make a multiplier but principally that has an alone live output. Is it possible to modify the T2 (Hv coil) of a stun gun to obtain just an live output? What think about this? Pd. Sorry for my dirty hands is that it takes the photos after working the whole day..
|
|
|
Post by Gary Lecomte on Nov 22, 2008 20:08:23 GMT -8
Alone Live Output? Sorry I Don't understand!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 23, 2008 0:38:16 GMT -8
Gary I did this drawing in order that understands himself better. A HV power with an alone hot output, it is like a neon tube tester. Thanks!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 23, 2008 0:47:23 GMT -8
The first drawing shows a classic stun gun, and the other one shows the same diagram but with only one hot output. My idea is to replace a FLYBABCK or IGNITION COIL for this diagram.
SORRY FOR THE DOUBLE POST!!!!
|
|
|
Post by Gary Lecomte on Nov 23, 2008 7:40:27 GMT -8
For a PROPER Efficient Stun Gun to give a Good Output, it needs to PULSE the Output, With Short, High Current Pulses.
A Voltage Multiplier DOESN'T Do That. (It gives a Continuous DC Output.)
A Car Ignition Coil or a Flyback, Also Wont work very good. Neither of them are capable of giving the High Current Pulses.
And Your Pictures Don't show the Required Pulse generating Circuit, Between the output of T1 and T1.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 23, 2008 8:03:00 GMT -8
Holy Brown Stuff! Thats the most graphics I've seen here since I joined! Especially them big fingers! Made me jump back from the monitor! Hey, I love it! Keep it up. The best, Ron.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 23, 2008 8:11:47 GMT -8
Be aware..........the dumb test is a data miner! My opinion!
|
|
|
Post by lamazoid on Nov 23, 2008 13:47:05 GMT -8
Ivan. it really would be better to use flyback for your purpose, if i understand correctly, you don't need a stun gun but just a high voltage sourse ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 26, 2008 13:21:13 GMT -8
yes! but portable.
|
|
|
Post by Gary Lecomte on Nov 26, 2008 14:38:33 GMT -8
What Output Voltage? At What Output Current? And What do you want to use for your power source?
|
|
|
Post by DJMota on Dec 8, 2008 8:46:50 GMT -8
|
|
|
Post by Gary Lecomte on Dec 8, 2008 15:55:28 GMT -8
For your Info, Near the bottom of this link, I have Added Two Links. Stun Gun Basics-1 (Basic Principals) And Stun Gun Basics-2 (A Real Stun gun and its Labeled parts) www3.telus.net/chemelec/Projects/Stun-Gun/Stun-Gun.htmAs to these: www.uoguelph.ca/~antoon/circ/hv/dazer/dazer.htmJust a Toy. capturedlightning.org/hot-streamer/kv2/kv2/hv/stun_gun/index.htmAlso a Toy www.youtube.com/watch?v=7eE-m9bUsqIDEFINATELY NOT 1,000,000 Volts. Maybe 50,000, but not much more. The Problem with a typical Multiplier to Create a Stun Gun is your output can be a Somewhat CONTINUOUS High Voltage, But at VERY LOW CURRENTS. (Well maybe not, If you use a Car Battery and Big Multiplier.) (I have one which will create 100KV. A proper Stun Gun Steps up the voltage/Current and Stores it in a Capacitor. It than Pulses it to a second transformer, to give out High Voltage and relatively High Current, "Short Bursts of power".
|
|