Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 2, 2008 7:51:01 GMT -8
Dear All..
this is the fourth time I post, sorry but actually I am confused..
my problem is to control the speed of a 4hp DC motor, its rating is
180VDC 20A I measured the Armature resistance and Field Resistance, both are (0.6 Ohm)
I want to know how to measure the lasting parameters:
Ke and Kt conatants J (monent of inertia) B (friction losses) La and Lf (armature and field inductance)
after determining this parameters, I will be able to model the motor to control it..
by the way, I need to brake the motor after the rotation, since it still rotates for about 15 minutes after power of.. AND SO, what is the recommended, series wound or shunt wound or separately excited?
what is the maximum current can field coil passes without damage, and also the starting current can the armature passes?
I use external power resistor for Armature and Field, but it runs VERY VERY VERY hot !!!!!
I need your help, thanx a lot, and GOOD BYE ... Shendy
|
|
|
Post by Gary Lecomte on Nov 2, 2008 15:45:30 GMT -8
About the only way you will get this Info below, is Ask the Manufacturer. Or get some Specialized Test Equipment.
Ke and Kt conatants J (monent of inertia) B (friction losses) La and Lf (armature and field inductance)
|
|